Marklin 60195 - Power Pack 120V/100 VA for LGB and 1-Gauge
Shows to be in stock at Ajckids
Scale: All Scales
UPC or EAN: 4001883601953
This switched mode power pack is for connecting to and for powering the 60216, 60226, as well as 60214/60215 Central Stations, and the 60174 and 60175 Boosters.
The input is 120 volts / 60 Hertz, and the output is 19 volts / 100 watts DC voltage. Weatherproof (IP67) switched mode power pack.
Connections: 4-pin mini DIN high current plug.
Dimensions 190 mm x 96 mm x 65 mm / 7-1/2” x 3-3/4” x 2-9/16”. The 60195 switched mode power pack is designed for us in dry areas.
Recommended only for LGB and 1 Gauge.
Charlie's Tip: Marklin says that the cross section of the wire from the Central Station to the track must be at least 0.5 square millimeters / approximately 0.0008 square inches. What that means is that you should run at least 20 Gauge wire. Not the thin stuff we normally use for H0. But I would recommend running even thicker wire, like 18 Gauge or even 16 Gauge when the distances get longer. The thicker wire will minimize a power loss/voltage drop.
|Availability||Shows to be in stock|
|UPC or EAN (GTIN)||4001883601953|
Charlie Also Recommends
Installation Digital Decoder (C Track)
Regular price $3689 $36.89
- choosing a selection results in a full page refresh