Trix 12515 - Diesel locomotive V200
This item may be out of stock.
The availability has not yet been updated.
UPC or EAN: 4028106125157
Prototype: German Federal Railroad (DB) class E 50 heavy freight locomotive. The largest design of the standard design electric locomotives from the new construction program of the Fifties. Original version with double lights and rain gutters. Use: Freight and passenger trains.
Model: The locomotive has a built-in digital decoder and a sound generator for operation with DCC, Selectrix, and Selectrix 2. It also has a motor with a flywheel. 4 axles powered. Traction tires. The headlights and marker lights change over with the direction of travel. The headlights are warm white LEDs. The headlights / marker lights and the cab lighting can be controlled digitally. The locomotive has a close coupler mechanism. It also has separately applied grab irons. Different light functions can also be controlled in conventional operation by means of a new bridge plug included with the locomotive. All of the functions can also be controlled in the digital format SX2.
Length over the buffers 122 mm / 4-13/16".
The German Federal Railroad's new construction electric locomotive program at the beginning of the Fifties also envisioned a heavy freight locomotive in the E 50, which was intended as a replacement for the E 94. The E 50 was designed first for heavy freight service on steeply graded routes; hence, it was supposed to provide performance that exceeded all electric locomotives previously built in Germany. Embedded in the total program of development for the new standard design electric locomotives, the lead management for the E 50 was given to the consortium of Krupp/AEG. The nominal power at 80 km/h / 50 mph was 4,500 kilowatts / 6,035 horsepower; the continuous power at 70 km/h / 44 mph was 4,218 kilowatts / 5,656 horsepower. With a view to the future, the E 50 was already designed for a maximum speed of 100 km/h / 63 mph, which could not be used to advantage for a long time in freight service because of older freight cars not suitable for such speeds. The higher performance requirements could only be achieved with appropriately larger designs of the essential components compared to the components for the other standard design electric locomotives. The transformer and the blower motors in particular required more room in the E 50. Three-axle trucks (C-C wheel arrangement) had to be installed so that the axle load of 21 metric tons was not exceeded. The long trucks meant that the frame for the body had to be longer, so that the E 50 was about 3 meters / approximately 10 feet longer than the E 10/E 40.
The first units were placed into service beginning in April of 1957; the last E 50 locomotive was placed into service in July of 1973. A total of 194 locomotives were built. As with the other standard design electric locomotives, the E 50 (designated as the class 150 starting January 1, 1968) underwent numerous structural changes and improvements. The most noticeable changes externally were the removal of the rain gutters, the handrails on the ends with grate-style footrests, as well as the equipping of the locomotives with the "Klatte" design vent grills. The technical progress on the E 50/150 did not stop at the turn of the century with the class 152 and 185 electric locomotives being placed into service. In 2003, the last of the class 150 was taken out of service. Only two units remain preserved as museum locomotives for future generations.
Charlie's Tip: This model is available as item no. Trix 12490 (analog) and as item no. Trix 12491 (digital), with different road numbers.
This item is currently out of stock.
|UPC or EAN (GTIN)||4028106125157|
Charlie Also Recommends
Installation Digital Decoder (C Track)
Regular price $3689 $36.89
- choosing a selection results in a full page refresh